MLA Group
 
MLA Group
MLA Group
MLA Group
MLA Group
MLA Group
MLA Group
MLA Group
MLA Group
MLA Group
 
MLA Group
ISO 9001:2000
MLA Group
ISO 9001:2000
 
MLA GROUP OF INDUSTRIES manufacturers, exporters and suppliers of precipitated chemicals and functional fillers, both synthetic and naturally occurring processed minerals including Silica , Precipitated Silica ( ppt silica ), Hydrated Calcium Silicate, Aluminium Silicate, Zinc Stearate, Calcium Stearate, Calcium Sulphate, Zinc-oxide active / transparent, Levigated / Surface treated China Clays, kaolin, china clay, calcined clay, Micronized Calcite, Dolomite, Talc
Aluminium Silicate
 
 
  Precipitated Silica Levigated / Micronized China clays  
  Aluminium Silicate Micronized Calcite / Dolomite  
  Micronized Talc/Barytes Zinc Stearate / Calcium Stearate  
  Zinc Oxide (Active / Transparent) Calcium Sulphate  
  Hydrated Calcium Silicate Azodicarbonamide (ADC) Blowing Agent  
  Aluminium Stearate PVC stabilizers - Powder form ( UNISTAB - PP series )  
  Glycerol Mono Stearate ( GMS ) PVC stabilizers - Flakes form ( UNISTAB - LPF series)  
      Zinc oxide ( white seal - 99.5 % and pharma grade )  
 
   
ABOUT THE PRODUCT

Aluminium Silicate having the general formula Al2SiO3, is remarkable for its use as filler and antisettling agent in paint and as semi reinforcing agent in rubber. It can be manufactured either by precipitation or by processing of the naturally occuring aluminium silicate minerals. The precipitated variety gives better properties due to smaller particle sizes and higher white strength value.

MANUFACTURING PROCESS
 
Aluminium Silicate is first precipitated in large tanks. It is then filtered and washed dried and micronized on most modern plant to prevent contamination. Our R&D department has developed the precipitation process to provide accurate control of particle size and surface area. The properties have been optimized in our different grades according to the application.
 
TYPICAL PHYSIOCHEMICAL PROPERTIES OF ALUMINIUM SILICATES
Property Unit Super Special Grade Special Grade Super Grade Comm. Super
Grade
General Grade
Appearance WHITE POWDERS
Bulk Density* gm/cc 0.20-0.25 0.24-0.28 0.30-0.35 0.35-0.40 0.40-0.46
pH Value Micron 9 to 10 9 to 10 8.5 to 9.5 8 to 9 7 to 8
Average particle size % 5 to 6 5 to 6 5 to 6 5 to 6 6 to 8
Residue on 700 mesh %(max) 1.0 1.0 1.0 1.0 1.0
Water absorption % 95-105 70-80 60-70 50-60 35-45
SiO2 % 68 64 61 58 60
Al2O3 % 17 20 24 28 30
Na2O %(max) 0.05 0.06 0.05 0.05 0.05
Moisture %(max) 3.0 2.0 1.5 1.5 0.5
Packing Kgs/bag 12.5 15 18 20 25
*At the time of packing.
Download Specifications
ADVANTAGES OF OUR PRODUCTS IN PAINTS
   
a. Part of white pigment like Titanium-dioxide (10% or more) can be replaced without loss of opacity.
b. Give faster surface and through-drying in product which also stand up better to abrasive treatment.
c. Excellent substrates for high gloss finishes as they ensure good levelling out.
d. Act as anti-setting agents for pigments and fillers. The viscosity of decorative paints containing our product is highly constant over extended periods of time. Being basic, they also have positive effect on storage stability.
e. Give excellent thicksotropy and facilitate dripless application.
ANVANTAGES IN RUBBER
 
The particles of the filler used interact with the polymer, thus changing the properties of the mix and vulcanized material. For a filler with definite chemical composition, this interaction becomes more intensive as the surface area of the filler particles increases.Due to fine micronization of our products, they have very large surface area and thus give excellent properties in terms of tensile strength, modulus and resistance to tear and abrasion. They are particularly suitable for soling and microcellular sheets as they give relatively fast cures and enable production of soling materials to be streamlined.
 
Home || About Us || R & D || Quality Control
Manufacturing || Services || Products || Our Clients || Contact Us
             
  MLA Group of Industries
111/230, Harsh Nagar, Kanpur-208012 (INDIA),
Ph.: (H.O.) +91-512-2291408/09/10 (EPABX), (Works) +91-512-2691154/55/56

E-mail:
sales@mlagroup.com, mktg@mlagroup.com